近3年西双版纳州勐腊县大气污染基本特征及污染原因分析

对西双版纳州生态环境局勐腊分局2017年8月-2020年8月逐日空气质量数据的分析表明,2-4月是勐腊县空气质量指数（Air Quality Index,AQI）频繁达到二级及以上的时段,空气质量分指数（Individual Air Quality Index,IAQI）能够达到二级及以上标准的污染物为PM_2.5、PM₁₀、O₃、SO₂中的一种或几种,PM_2.5、PM₁₀污染较为严重,PM_2.5对空气质量的影响最大,可使空气质量达到重度污染,混合污染出现比例远大于单一污染.2019、2020年3-4月勐腊县轻度及以上连续污染日数超过5 d的5次过程中,4次污染过程的主要潜在源区在勐腊上风方向老挝西北部及泰国与其相邻的区域,权重潜在源贡献因子（Weight Potential Source Contribution Function,WPSCF）大于0.6的区域与同年3、4月泰国西北部、老挝西北部的火点密集区有较好的对应关系,4次污染过程与老挝西北部及泰国与其相邻区域的生物质燃烧关系密切;1次污染过程的主要潜在源区主要在当地,当地建筑施工、交通运输、生物质燃烧和餐饮行业细颗粒物的排放会导致勐腊县空气质量出现明显下降.为验证勐腊县连续污染过程受到了周边国家烧荒的影响,利用逐日气溶胶光学厚度（Aerosol Optical Thickness,AOT）对2020年3月23-4月9日的污染过程进行了个例分析,发现AOT大值区位于勐腊上风方向,高浓度污染物持续稳定地向勐腊传输导致勐腊出现持续重污染.     

基于Phase2的不同配比充填体厚度的数值模拟研究

在充填体作用机理,稳定性分析与监测,爆破地震效应,静动态特性及损伤理论等方面的研究基础上,依托安庆铜矿高阶段大直径深孔采矿法第一步骤采场的充填现状,采用Phase2软件建立了多种数值分析模型对不同灰砂比充填体厚度的充填效果进行数值模拟研究,并进行了多方案技术经济对比分析。研究结果表明:灰砂比为1∶4,1∶8,1∶10对应充填体厚度分别为10,24,22 m时,为最优方案。该充填体厚度可为矿山采场充填配比设计、充填管理及充填质量提供技术参考。     

黄土高原半干旱区覆膜玉米土壤温度的变异特征

黄土高原半干旱丘陵山区受特殊的地理、地形以及水文气象条件的影响,造成农业生产播种难、出苗率低等问题,严重制约着农业的发展,但通过覆膜坐水技术能够起到抗旱保墒、提高地温、改善土壤肥效等作用。以哲单7号玉米ZeamaysL为供试品种,在设置对比试验小区（覆膜与不覆膜）的基础上,通过分析覆膜玉米土壤温度变异特征,描述了覆膜后增温、提墒、增产的过程,研究结果表明：覆膜处理与不覆膜处理相比,增温最明显的时期出现在出苗到拔节阶段,且10cm．和20cm处的温差表现为最大,可增温2．5℃左右,而后期增温减慢,播种后覆膜增温为玉米发芽生长提供了良好的生长环境,大大提高了出苗率,为作物节水增产提供了必要条件。     

Biosorption of Cr(III) from aqueous solution by freeze-dried activated sludge: Equilibrium,kinetic and thermodynamic studies

Batch biosorption experiments were conducted to remove Cr(III) from aqueous solutions using activated sludge from a sewage treatment plant. An investigation was conducted on the effects of the initial pH, contact time, temperature, and initial Cr(III) concentration in the biosorption process. The results revealed that the activated sludge exhibited the highest Cr(III) uptake capacity (120 mg·g⁻¹) at 45°C, initial pH of 4, and initial Cr(III) concentration of 100 mg·L⁻¹. The biosorption results obtained at various temperatures showed that the biosorption pattern accurately followed the Langmuir model. The calculated thermodynamic parameters, ΔG^o (−0.8– −4.58 kJ·mol⁻¹), ΔH^o (15.6–44.4 kJ·mol⁻¹), and ΔS^o (0.06–0.15 kJ·mol⁻¹·K⁻¹) clearly indicated that the biosorption process was feasible, spontaneous, endothermic, and physical. The pseudo first-order and second-order kinetic models were adopted to describe the experimental data, which revealed that the Cr(III) biosorption process conformed to the second-order rate expression and the biosorption rate constants decreased with increasing Cr(III) concentration. The analysis of the values of biosorption activation energy (E_a = −7 kJ·mol⁻¹) and the intra-particle diffusion model demonstrated that Cr(III) biosorption was film-diffusion-controlled.     

吉林省主要覆膜作物地膜残留情况调查

通过文献调研、问卷调查和典型样点采集的方法对吉林省3种主要覆膜作物的地膜残留情况进行调查分析,结果表明：地膜残留量与覆膜年限、地膜回收方式以及种植作物种类密切相关。随覆膜时间的延长地膜残留量有增加的趋势。3种模式地膜残留量由高到低为：瓜菜模式〉玉米连作模式〉花生连作模式,连续覆膜10年,3种模式的地膜残留量分别为30、28.35 kg·hm^-2和15.9kg·hm^-2。以一级污染水平作为标准（75 kg·hm^-2）,覆膜量每年按75～150 kg·hm^-2、年残留率按1.2%～4.02%计,估算吉林省安全使用地膜的年限约为12～83年。     

铸造废砂／废地膜／粘附土三元复合体系的研究

通过X射线衍射分析、红外光谱分析、热分析、电镜及能谱分析、图像分析,可以判断废旧地膜上粘附土的主要矿物质是结晶二氧化硅（粉粒级石英）,它们与聚合物基废弃物复合材料中作为填料的铸造石英砂的性状类同。废旧地膜可以不经清洗,直接与铸造废砂制备复合材料,这可大大降低复合材料的加工成本。这种复合材料实际上是由基体PE、粘附土中大量的SiO2和铸造石英砂SiO2组成的三元复合体系。     

综合防尘技术在开元公司的应用

主要介绍了采煤机高压引射降尘系统、液压支架自动喷雾、粉尘浓度在线检测超限自动喷雾等综合防尘技术在开元公司矿井中的应用。通过对降尘系统效果监测和分析,降尘效率达到84．1％,降尘效果明显,改善了作业场所的劳动卫生条件。     

地膜覆盖对稻-油轮作农田温室气体排放的影响

以位于西南大学农业部重庆紫色土生态环境重点野外科学观测试验站内的稻-油轮作为研究对象,采用静态箱/气相色谱法,对覆膜和对照(不覆膜)处理下稻油轮作CO2、CH4和N2O排放特征进行了为期1 a的原位观测.结果表明,稻-油轮作农田CO_2、CH_4和N_2O排放通量均呈现出明显的季节变化,且2种处理下这3种温室气体的季节变化模式相似.覆膜处理下稻-油轮作农田全年CH_4排放量为(46. 14±13. 40) kg·hm~(-2),相比于对照处理下的(18. 61±2. 05) kg·hm~(-2),提高了147. 93%(P 0. 05),但覆膜对CO_2和N_2O的排放影响并不显著,覆膜及对照处理下CO2年排放量分别是(-47. 54±2. 11) t·hm~(-2)和(-47. 60±2. 19) t·hm~(-2),N2O年排放量分别是(18. 94±4. 74) kg·hm~(-2)和(23. 14±3. 68) kg·hm~(-2).覆膜和对照处理下GWP值分别为-41. 16 t·hm~(-2)和-40. 95 t·hm~(-2),表现为大气温室气体的吸收汇,但差异并不显著.     

Integrating soil carbon cycling with that of nitrogen and phosphorus in the watershed model SWAT: Theory and model testing

In this paper we describe and test a sub-model that integrates the cycling of carbon (C), nitrogen (N) and phosphorus (P) in the Soil Water Assessment Tool (SWAT) watershed model. The core of the sub-model is a multi-layer, one-pool soil organic carbon (S_C) algorithm, in which the decomposition rate of S_C and input rate to S_C (through decomposition and humification of residues) depend on the current size of S_C. The organic N and P fluxes are coupled to that of C and depend on the available mineral N and P, and the C:N and N:P ratios of the decomposing pools. Tillage explicitly affects the soil organic matter turnover rate through tool-specific coefficients. Unlike most models, the turnover of soil organic matter does not follow first order kinetics. Each soil layer has a specific maximum capacity to accumulate C or C saturation (S_x) that depends on texture and controls the turnover rate. It is shown in an analytical solution that S_x is a parameter with major influence in the model C dynamics. Testing with a 65-yr data set from the dryland wheat growing region in Oregon shows that the model adequately simulates the S_C dynamics in the topsoil (top 0.3 m) for three different treatments. Three key model parameters, the optimal decomposition and humification rates and a factor controlling the effect of soil moisture and temperature on the decomposition rate, showed low uncertainty as determined by generalized likelihood uncertainty estimation. Nonetheless, the parameter set that provided accurate simulations in the topsoil tended to overestimate S_C in the subsoil, suggesting that a mechanism that expresses at depth might not be represented in the current sub-model structure. The explicit integration of C, N, and P fluxes allows for a more cohesive simulation of nutrient cycling in the SWAT model. The sub-model has to be tested in forestland and rangeland in addition to agricultural land, and in diverse soils with extreme properties such high or low pH, an organic horizon, or volcanic soils.     

加工误差对压气机叶栅气动性能的影响

目的 研究不同区域加工误差对叶片气动性能的影响。方法 选用轴流压气机出口级静叶叶中截面,以叶型厚度变化和中弧线变化为特征,分别在叶型前缘、最大厚度和尾缘区域添加加工误差,采用数值模拟方法,对比设计叶型气动性能,研究叶型各区域几何偏差对性能的影响。结果 叶型前缘几何偏差对气动性能的影响最大,偏差造成的中弧线偏移对性能变化起主导作用。尾缘区域几何偏差对性能的影响趋势与前缘区域完全相反。考虑叶型整体偏差时,轮廓度正偏差造成的性能恶化更加显著。结论 所得的几何偏差影响规律可为实际叶片加工过程中工艺的制定和超差审理提供数据支持。